H Series High Bonding & Peeling Amandla I-Hotmelt Adhesive TPU

I-H Series High Bonding & Peeling Amandla Okunamathisela I-Hotmelt TPU Isithombe Esifakiwe

incazelo emfushane:

I-TPU hotmelt adhesive iwuhlobo lwe-thermoplastic polyurethane elastomer, enezici ezivelele zokusebenza okuhle kokunamathela, amandla aphezulu, ukunwebeka okuhle kakhulu, ukumelana nokugqokwa okuhle, njll. Inokukhethwa kwefomula ephezulu, engahlangabezana nezidingo ezihlukene, ezifanele ikakhulukazi izindwangu zokubopha. , isikhumba, irabha nezinto zepulasitiki, njll.

Thumela i-imeyili kithi

Imininingwane Yomkhiqizo

FAQ

Omaka bomkhiqizo

Izici

I-Elasticity enhle kakhulu, i-High Bonding & Peeling Amandla, Izakhiwo Ezivelele Zokubuyisela

Isicelo

Ifilimu ye-Hotmelt ne-Tape, i-Fabric Coating, i-Toe Puffs&Counters, njll.

Izakhiwo	Okujwayelekile	Iyunithi	H190	H290	H290H	H295	H570	H680	H690	H220E
Ukuminyana	I-ASTM D792	g/cm³	1. 2	1. 2	1. 2	1. 2	1. 2	1. 2	1. 2	1. 2
Ukuqina	I-ASTM D2240	Shore A	97	97	97	95	75	80	90	95
Amandla Okuqina	I-ASTM D412	I-MPa	35	25	30	30	15	20	32	35
Elongation at Break	I-ASTM D412	％	650	700	700	700	600	500	450	650
Tfb	-	℃	70	60	60	60	105	120	135	85
I-R&B Softing Point	I-ASTM D6493	℃	140	80	90	110	125	140	-	-
Isikhathi Esingena-Tack	-	imiz	5	4	4	3	8	6	2	13

QAPHELA: Amanani angenhla akhonjiswa njengamanani ajwayelekile futhi akufanele asetshenziswe njengokucaciswa.

Umhlahlandlela Wokucubungula

Ukuze uthole imiphumela emihle, ukomiswa kwangaphambilini komkhiqizo phakathi namahora angu-3-4 ngezinga lokushisa elinikeziwe ku-TDS.
Imikhiqizo ingasetshenziselwa ukubumba umjovo noma ukukhipha, futhi sicela uhlole imininingwane eyengeziwe ku-TDS.

Umhlahlandlela Wokucubungula Wokubumba Umjovo		Umhlahlandlela Wokucubungula we-Extrusion
Into	Ipharamitha	Into	Ipharamitha
Umbhobho(℃)	Inikezwe ku-TDS	Ukufa(℃)	Inikezwe ku-TDS
I-Metering Zone(℃)		I-adaptha(℃)
Indawo Yokucindezela (℃)		I-Metering Zone (℃)
Indawo yokudla(℃)		Indawo Yokucindezela (℃)
Ingcindezi yomjovo(ibha)		Indawo yokudla (℃)