Uchungechunge lwe-E1 oluhle kakhulu lwe-Abrasion Resistance Polyester-based TPU
Izici
Ukumelana Okuhle Kakhulu Kwe-Abrasion, Ukumelana Kawoyela/Amakhemikhali, Ukusebenza Okuhle Kokuqina, Ukumelana Nokucindezela Okuphezulu, Izakhiwo Zemishini Ezivelele
Isicelo
I-Belt, Hose&Tube, Seal&Gasket, Compounding, Wire&Cable, Automotive, Footwear, Caster, Film, Over-Molding, njll.
| Izakhiwo | Okujwayelekile | Iyunithi | E175 | E180 | E185 | E190 | E195 | E155D | E165D | E175D | ||
| Ukuminyana | I-ASTM D792 | g/cm3 | 1. 18 | 1. 19 | 1. 19 | 1. 19 | 1. 2 | 1. 21 | 1. 21 | 1. 22 | ||
| Ukuqina | I-ASTM D2240 | I-Shore A/D | 74/- | 82/- | 86/- | 92/- | 95/- | -/55 | -/65 | -/75 | ||
| Amandla Okuqina | I-ASTM D412 | I-MPa | 22 | 35 | 40 | 45 | 50 | 52 | 55 | 60 | ||
| 100% Modulus | I-ASTM D412 | I-MPa | 3 | 5 | 7 | 10 | 15 | 16 | 22 | 35 | ||
| 300% Modulus | I-ASTM D412 | I-MPa | 7 | 12 | 15 | 24 | 35 | 38 | 40 | 43 | ||
| Elongation at Break | I-ASTM D412 | ％ | 600 | 550 | 500 | 450 | 400 | 380 | 350 | 300 | ||
| Izinyembezi Amandla | I-ASTM D624 | kN/m | 75 | 100 | 120 | 140 | 160 | 180 | 200 | 240 | ||
| I-DIN Ukulahleka Kwe-Abrasion | I-DIN 53516 | mm3 | / | 30 | 30 | 35 | 35 | 35 | 35 | 40 | ||
| Tg | I-DSC | ℃ | -42 | -40 | -37 | -32 | -30 | -26 | -22 | -15 | ||
| Isethi Yokucindezela | amahora angama-22 @70℃ | I-ASTMD395 | ％ | / | 18 | 21 | 24 | 25 | 28 | 30 | 32 | |
| Amahora angu-24@100℃ | I-ASTMD395 | ％ | / | 28 | 30 | 33 | 35 | 36 | 38 | 40 | ||
QAPHELA: Amanani angenhla akhonjiswa njengamanani ajwayelekile futhi akufanele asetshenziswe njengokucaciswa.
Umhlahlandlela Wokucubungula
Ukuze uthole imiphumela emihle, ukomiswa kwangaphambilini komkhiqizo phakathi namahora angu-3-4 ngezinga lokushisa elinikeziwe ku-TDS.
Imikhiqizo ingasetshenziselwa ukubumba umjovo noma ukukhipha, futhi sicela uhlole imininingwane eyengeziwe ku-TDS.
| Umhlahlandlela Wokucubungula Wokubumba Umjovo | Umhlahlandlela Wokucubungula we-Extrusion | |||
| Into | Ipharamitha | Into | Ipharamitha | |
| Umbhobho(℃) | Inikezwe ku-TDS | Ukufa(℃) | Inikezwe ku-TDS | |
| I-Metering Zone(℃) | I-adaptha(℃) | |||
| Indawo Yokucindezela (℃) | I-Metering Zone (℃) | |||
| Indawo yokudla(℃) | Indawo Yokucindezela (℃) | |||
| Ingcindezi yomjovo(ibha) | Indawo yokudla (℃) | |||
Ukuhlola
Yonke imikhiqizo ihlolwe kahle ngesikhathi sokukhiqiza nangemuva kokukhiqizwa. Isitifiketi Sokuhlaziya (COA) singanikezwa kanye nemikhiqizo.
Izitifiketi
Sinezitifiketi ezigcwele, ezifana ne-ISO 9001, ISO 14001, ISO 45001, IATF 16949, CNAS National Laboratory
Q: Ungakwazi ukunikeza amasampula?
A: Singahlinzeka ngamasampula. Sicela usithinte ukuze uthole amasampula
Umbuzo: Iyiphi ichweba ongayiletha impahla?
A: Qingdao noma Shanghai.
Q: Kuthiwani ngesikhathi sokuhola?
A: Ngokuvamile kuba yizinsuku ezingu-30. Kwamanye amamaki ajwayelekile, singenza ukulethwa ngokushesha.
Umbuzo: Kuthiwani ngenkokhelo?
A: Kufanele kube inkokhelo kusengaphambili.